Williams Funhouse Pinball Machine LED's GROUND UP RESTORE

This Williams Funhouse pinball has been restored from the ground up , this game looks new and plays like new and is AMAZING. We have spared no expense in restoring this pinball with ton's of new parts.

We have fully shopped out the play field which means we completely tear it down and clean and wax and installed new rubbers and new lights. We have also rebuilt all flippers and replaced all coils. We have also installed new ramps and new plastics and replace the old MPU board with a new one. And new updated ROM's installed. The cabinet has been stripped down and sanded and all repairs done and new full cabinet art installed.

We have also replaced all lights with LED's which really makes this pinball and Rudy's head has been rebuilt. The side rails and top glass and legs and leg hardware are all new.

New locks installed This pinball plays with no errors and plays great. We also go thru every machine we do and un hack it which means all. Wire nuts and black tape that route techs have put on it is taken off and machine is put make to factory no black tape or wire nuts or any of that. Our high end restoration games are truly a pinball collectors dream. Each machine is completely restored to better than new condition.

Pristine cabinets, backglass, and playfields are the result of over 100 hours of detailed craftsmanship and new, high-quality materials. These highly collectable machines looks like a new machine coming off the assembly line. We are in an elite class of companies who can offer these completely restored machines. Remove everything from Playfield and Cabinet. Tumble and polish all hardware.

Sand off old cabinet artwork to bare wood. Bondo and repair cabinet (several times).

Tape off inside bottom of cabinet and paint whole cabinet. Prep cabinet surface for decals. Install new legs and hardware. Install brand new coin door.

Disassemble power box and transformer, clean, paint and reassemble. Install new button(s), flipper button switches, new siderails, new lockdown bar receiver, new head head hinges, new bolts/nuts. Disassemble backbox light board, clean harness, paint light board, and reassemble. Disassemble board panel, paint, rebuild and clean all boards, and reassemble. Disassemble speaker panel, clean/paint, install new DMD, new speaker panel plastic, reinstall in head.

Paint and install wooden siderails. Install all new pop bumper parts, playfield support rails, playfield hangers. Disassemble all playfield assemblies, clean all brackets and hardware, clean all coils and install new coils , brand new plungers, coil sleeves, etc. Install completed assemblies on playfield. Clean and regrain all ball guides.

Clean all lamp boards and install LEDs. Disassemble all playfield plastics and install new plastic set. Disassemble ramp(s), clean harnesses, polish hardware, replace switches, reassemble on brand new ramp. Clean all wiring harnesses by hand, , reinstall on playfield. 26" W x 30" D x 72 H.

If you are picking up your game it can be picked up at our showroom only Monday thru Saturday between 8 and 5 showroom located at. It is rare but once in a while it happens.

And we must be called so we can file a claim. Any item that is no inspected and is signed for as undamaged no claim can be made it is yours from there. The item "Williams Funhouse Pinball Machine LED's GROUND UP RESTORE" is in sale since Sunday, July 23, 2017.

This item is in the category "Collectibles\Arcade, Jukeboxes & Pinball\Pinball\Machines". The seller is "chattanoogapinballcompany" and is located in Chattanooga, Tennessee. This item can be shipped worldwide.

Country of Manufacture: United States
Original/Reproduction: Original
Country/Region of Manufacture: United States
Brand: Bally