Pinball LedBar led replacement lighting

A new idea to replace unreliable traditional lamp holders and also upgrade to LED lighting, all in a single, easy to install unit - the "LedBar"! A major problem with ageing pinball machines is the traditional lamp sockets. These degrade over time and eventually stop working or become intermittent. The LedBar solves all these reliability issues. It replaces both the old lamp socket and the bulb - at a price that is much cheaper than replacing the lamp holder, and, is 100% reliable.

These have been designed to work in Early Solid State Pinball machines, it works in the majority of Bally and Stern pinball machines that utilize the AS-2518-23 Lamp driver board (and the aux lamp driver board). They may also work in other pinball machines, I tested in my Williams Cosmic Gunfight machine and they worked fine.

The LedBar's are designed to replace any of the switched/feature lights but are not suitable for the AC powered GI - General Illumination - I have "AC LedBars" for that! Pictures 4,5,6 show a playfield before and after installation of LedBars.

Please note; Some pinball games utilize a split AC system to control 2 lamps with one circuit/ SCR - e. LedBar's will not work properly with these machines (ordinary LEDs don't either), as there is a noticeable flicker due to the lamp only being switched on for 50% of the AC cycle.

This item is in the category "Video Games & Consoles\Coin-Operated Gaming\Pinball Machines". The seller is "b1gman" and is located in this country: GB. This item can be shipped to United Kingdom.

PAck Size: 100
Type: Pinball Machines