NEW RED Scheppach UMF1600 Pinball Playfield workbench & works as mitre saw stand

  

Full kit as shown, includes accessories. (new & sealed) but it is exactly the same model as the BLUE one seen in photos 2 & 3. That we bought 8 years ago, and I use for repairing pinball playfields as this particular model is exactly the right size, and is very strong and heavy duty. And almost every piball playfield just clips in between the rollers. To work on other side it takes 10 secondsto unclip and flip playfield over.

Work zone which is a quality ALDI brand. And is most probably the best value and heavy duty saw bench ALDI have offered. Usually good Aldi offers sell out fast.

I think this was a very good offer item. As it is a rebranded. It's a stand for an electric cross-cut mitre saw. Has stated capacity for 150kg.

When you undo the mitre saw clamps (takes 5 seconds) they can actually remain bolted to your cross-cut mitre saw and re-installed in 5 seconds. Unlike similar benches, this bench model is near enough perfect size for working on both sides, top or bottom. Of every playfield i've tried, sys 6,7,11, bally, zaccaria, williams and EM games.

There has been enough clearance for all the mechanisms on all machines tried, and all have clipped in reasonably securely in one of 2 different ways between the 2 side arms when fully raised. Either clipped between the 2 rollers, or better clamped under the rollers as more secure. A small clamp could be used to fix solid however we have never needed to use one. It helps clamping if apron is removed. The roller arms on each end are sturdy enough to hold the heaviest of playfields and the.

Bench is short enough to hold all standard length playfields (106-109cm). Most of these type saw tables won't work with anything shorter than 115cm or more. Which isn't done very often as you either work on the top or the bottom. And it doubles up as a bench for a cross cut mitre saw.

Legs fold up quickly and lock firmly in place, easy to carry.